21 Aug Uneven Concrete Pool Deck: Its Causes And Solution
Along with the sidewalks and driveways, pool decks are the next most common concrete-related issue. Uneven or sunken pool decks can be hazardous and may lead to huge cracks in the building and accidents, which may pose a risk to life. Therefore, fixing it immediately is crucial for building and an individual’s health. Advanced solutions like concrete lifting are the best solution to address concrete-related issues. Concrete lifting in Calgary not only saves costs by eliminating replacement requirements but also provides effective results. If you have found a trip hazard near the pool or any other concrete-related problem, then don’t worry; you have the option to repair it. Discover how to level concrete pool deck effectively and its causes here!
Causes Of Sinking Concrete Pool Deck
Several factors can affect the surface near the pool, causing uneven levels. Here are the reasons for sinking concrete pool decks.
Soil Erosion
Soil erosion is the most common cause of lifting a pool deck. For several reasons, the soil beneath the pool deck can shift from its original place. One of the main reasons is the natural settling of soil over time. As the soil underneath loses its uniformity and density, voids are created, and without adequate support, concrete slab cracks or begins to move from this place.
Water Intrusion
Before you learn how to level concrete pool decks, discuss another cause of uneven pool desks: water intrusion. Improper drainage can cause soil to swell, which can lift the concrete slabs, resulting in cracks and uneven surfaces.
Tree Root Growth
Another possible lifting pool deck is the growth of tree roots underneath the concrete. Roots grow naturally anywhere, whether it is beneath the pool deck or driveways. As they grow, they exert upward pressure on the concrete, lifting the concrete base and resulting in damage.
Freeze-Thaw Cycles
Freeze-thaw cycles (FTC) are another factor that affects concrete. In regions with cold winters, water seeps into cracks or joints in the concrete and then freezes and expands. The expansion exerts pressure, lifting the concrete. Repeated freezing and thawing leads to significant damage over time.
Now that you know the causes, it is the right time to learn how to level concrete pool decks.
Which Concrete Method Is Best To Fix A Pool Deck?
Fixing a pool deck requires addressing the specific issues affecting it, such as sinking, cracking, or uneven surfaces. Here is how to fix uneven concrete around pool!
Polyjacking
Polyjacking is considered the modern solution for leveling concrete due to its quick curing time and lasting solutions. It uses polyurethane foam injected into the surface through small holes drilled into the concrete. Once the foam is injected, it expands, lifts the concrete, and fills the voids beneath the slab.
Mud Jacking
If you are searching for how to level concrete pool deck, mud jacking is a solution. Small holes are drilled into the concrete, and a slurry mixture of water, soil, and cement is pumped beneath the slab. The pressure from the slurry raises the concrete and brings it to its original position. Mud jacking is relatively less expensive than poly jacking.
Concrete Lifting & Leveling
Similar to mud jacking, concrete lifting also aims to raise the concrete and level the surface. This method involves hydraulic jacks lifting the concrete and injecting material beneath the slab to raise it. Concrete lifting is considered one of the best methods for fixing a damaged pool deck.
Deep Foam Injection
When there is a deep foam injection, why be concerned about how to level concrete pool deck? Deep foam injection is another effective method to tackle concrete-related issues. Primarily focused on stabilizing soil and lifting concrete, deep foam injection uses high-density polyurethane foam and is injected into the soil beneath the concrete. The foam expands and hardens, filling voids and lifting the slab. This method is especially considered when mud jacking might be inefficient.
So stop worrying about how to level concrete pool deck when there are many concrete lifting methods.
Preventive Measures & Maintenance Tips
While repair and maintenance are necessary, prevention is always better than cure. The following precautions and tips can prevent damage.
Preventive Measures
- Clean the pipelines and downspouts regularly to prevent choking and water from sinking beneath the pool deck.
- Regularly check the cracks and signs of movement. Early detection can prevent major concrete problems.
- Tree management can help prevent pool deck damage. Do not choose an area with trees for a pool. If there are trees near the pool, trim them regularly to mitigate the risk of damage from roots.
- Sealants should be applied to joints and cracks to prevent water infiltration, which can cause concrete to expand and contract.
Learning how to level concrete pool deck is not enough for an appealing site. You must know preventive measures and maintenance tips to save the cost of repairing and keeping your building in good condition.
Maintenance Tips
- Apply concrete sealant every few years to protect the surface from water, environmental, and chemical damage. You can hire a professional for concrete sealing services.
- Regularly clean the deck to remove debris that can stain or damage the surface.
- Address any leaks from the pool and surrounding areas promptly to prevent water drainage.
FOAMEXperts: Level Uneven Surface Safely & Effectively!
An uneven surface can be caused, at times, by many reasons. So be ready with the solution to address the problem immediately. FOAMEXperts are professional concrete lifting solution providers that take care of all problems related to concrete with utmost safety. Our experts specialize in restoring uneven and sunken concrete surfaces, ensuring a safe and smooth surface. Using advanced tools and techniques, like deep foam injection, we lift sidewalks, driveways, patios, and pool decks efficiently and affordably. Reach our experts at 403-589-9496 for concrete lifting services in Calgary!
No Comments